Cast Brass TOWEL BAR BRACKETS
Base: 2"high x 7/16"wide x 2-1/2"projection
Uses 1/2" dowel rod (NOT included)
Sold by the Pair  -  B-2703

 $ 8.50 pair + shipping

Shipping available to the Lower 48 Continental United States Only. 

Click here to see our Payment Terms
To pay using Money Order or Cashier's Please Contact Us

Cast Brass MORRIS CHAIR BRAKETS
Overall: 8"long x 15/16"wide
Hooks will accommodate 3/8" to 1/2" diameter rods. Common angle of brackets adapt to the curve of most Morris chairs.
Sold by the Pair  - B-5277

 $ 39.95 pair. + shipping

Shipping available to the Lower 48 Continental United States Only. 

Click here to see our Payment Terms
To pay using Money Order or Cashier's Please Contact Us

Cast Brass MORRIS CHAIR ROD
Overall: 28-3/4"long
Rod: 27"long x 3/8"diameter
Beehive Finials: 3/4"long x 7/8"diameter
Finials are attached with set screws which can be removed, allowing the rod to be cut to length if necessary. NOTE: Only one end of rod is shown. Each rod comes with two (2) Finials.  - B-5287

 $ 21.50 ea. + shipping

Shipping available to the Lower 48 Continental United States Only. 

Click here to see our Payment Terms
To pay using Money Order or Cashier's Please Contact Us

Brass Plated Steel REAR MOUNT MIRROR SUPPORTS
Each Clamp: 1-5/16"high x 13/16"wide
Pin: 1-1/2"long x 7/32"diameter
Traditional American Style. Sold by the Set to mount one mirror. -D-2707

 $ 5.50 set  + shipping

Shipping available to the Lower 48 Continental United States Only. 

Click here to see our Payment Terms
To pay using Money Order or Cashier's Please Contact Us

Brass Plated Steel REAR MOUNT MIRROR SUPPORTS
Each Clamp: 1-1/8"long x 1/2"wide
Pin: 1-5/8"long x 3/16"diameter
Sold by the Set to mount one mirror. - D-2710

 $ 5.50 set + shipping

Shipping available to the Lower 48 Continental United States Only. 

Click here to see our Payment Terms
To pay using Money Order or Cashier's Please Contact Us

Brass Plated Steel Shelf Rests
1/2" x 3/4" extension ~ Fits into 1/4"diameter hole
Sold in Lots of 12- D-2781

 $ 3.25 + shipping

Shipping available to the Lower 48 Continental United States Only. 

Click here to see our Payment Terms
To pay using Money Order or Cashier's Please Contact Us

  Brass Plated Steel SPOON TYPE SHELF REST
1/2" x 1/2" extension ~ Pin: 1/4"diameter
Sold in Lots of 12 - D-2791

 $ 2.95  + shipping

Shipping available to the Lower 48 Continental United States Only. 

Click here to see our Payment Terms
To pay using Money Order or Cashier's Please Contact Us

Brass Plated Stamped Steel Hanger
Overall: 1-1/8"high x 1/2"wide
Sold by the Dozen - D-3059

$ 2.95  + shipping

Shipping available to the Lower 48 Continental United States Only. 

Click here to see our Payment Terms
To pay using Money Order or Cashier's Please Contact Us

Nickel Plated Steel Sawtooth Picture Hanger
Overall: 2-3/4"long x 5/16"wide
Sold by the Dozen - N-3049

$ 1.95  + shipping

Shipping available to the Lower 48 Continental United States Only. 

Click here to see our Payment Terms
To pay using Money Order or Cashier's Please Contact Us

1 5/8"long X 1/4"wide
Nickel Plated Steel
Sold in lots of 12  - N-3048

$ 1.95 ea. + shipping

Shipping available to the Lower 48 Continental United States Only. 

Click here to see our Payment Terms
To pay using Money Order or Cashier's Please Contact Us

Antique Brass Finished Cheval Mirror Mounts
Bow: 1-5/16"wide x 1-1/8"projection
Bolt: 3-1/2"long x 9/32"diameter
Overall: 4-13/16"long
Sold by the Pair complete with nuts and washers  - AD-2722

$ 9.75 ea. + shipping

Shipping available to the Lower 48 Continental United States Only. 

Click here to see our Payment Terms
To pay using Money Order or Cashier's Please Contact Us

$ 1.35 ea. + shipping

Click here to see our Payment Terms
To pay using Money Order or Cashier's Please Contact Us

Clear Plastic MIRROR CLIP for Surface Mounting
Overall: 13/16"long x 5/8"wide x 1/2"projection
Mounts glass up to 1/4"thick  - PL-2714

$ 0.50 ea. + shipping

Shipping available to the Lower 48 Continental United States Only. 

Click here to see our Payment Terms
To pay using Money Order or Cashier's Please Contact Us

1 1/2"diameter x 1/4"thick
Clear Plastic  - PL-2713

$ 0.50 ea. + shipping

Shipping available to the Lower 48 Continental United States Only. 

Click here to see our Payment Terms
To pay using Money Order or Cashier's Please Contact Us

Nickel Plated Steel Channel MIRROR CLIP with Felt Liner
Overall: 1-3/4"high x 1/2"wide x 5/8"projection with 5/16" Lip  - S-2712

$ 0.75 ea. + shipping

Shipping available to the Lower 48 Continental United States Only. 

Click here to see our Payment Terms
To pay using Money Order or Cashier's Please Contact Us

Antique Brass Finished Steel Mirror Brackets
Catch - 1-9/16"high x 7/8"wide
Plate w/Swivel Bracket - 1-11/16"high x 5/8"wide
Requires 1/2"space for assembly. Set mounts one mirror.  - AD-2711

$ 5.99 ea. + shipping

Shipping available to the Lower 48 Continental United States Only. 

Click here to see our Payment Terms
To pay using Money Order or Cashier's Please Contact Us

Steel Turnbutton with Black Oxide Finish
1"long x 7/16"wide
Sold by the Dozen - BL-3038

$ 1.99 + shipping

Shipping available to the Lower 48 Continental United States Only. 

Click here to see our Payment Terms
To pay using Money Order or Cashier's Please Contact Us

16 Gauge Plain Steel CORNER BRACKETS
Overall: 4-5/8"long x 2"wide
Sold in Lots of 12 - S-2771

$ 9.75  + shipping

Shipping available to the Lower 48 Continental United States Only. 

Click here to see our Payment Terms
To pay using Money Order or Cashier's Please Contact Us

22 Gauge Steel CORNER OR CHAIR BRACE with Statuary Bronze Finish
Each Leg: 1-3/8"long from corner x 3/4"wide
Sold in Lots of 12 - S-2773

$ 4.50 + shipping

Shipping available to the Lower 48 Continental United States Only. 

Click here to see our Payment Terms
To pay using Money Order or Cashier's Please Contact Us

Steel STACKING BOOKCASE EQUALIZER
Each Leg: 24-1/4"long x 13/32"wide
Includes screws and 3 S-3027 Screw Eyes for installation (instructions included)Used on C and SD Series Sectional Bookcases by Globe-Wernicke.  - S-2790

$ 12.99ea. + shipping

Shipping available to the Lower 48 Continental United States Only. 

Click here to see our Payment Terms
To pay using Money Order or Cashier's Please Contact Us

Leg w/Extension - 24"long x 5/8"wide
Extension - 13"long x 1/4"wide
Long Leg - 29 1/2"long x 5/8"wide
Includes screws and screw eyes for installation
Steel Used on E,G, and H Series Sectional Bookcases by Globe-Wernicke. Will work on Macey and other makes of this dimension in conjuction with Brackets & Straps. -  S-2789

$ 15.95 ea. + shipping

Shipping available to the Lower 48 Continental United States Only. 

Click here to see our Payment Terms
To pay using Money Order or Cashier's Please Contact Us

Sectional Bookcase Side Straps 11-1/2"long x 1"high - Steel with Black Finish Installed on the outside bottom of each sectional case to align stacks. Each strap has an intelocking clip for side to side alignment of multiple stacks. Includes 2 Steel Wedges (3/4"long x 5/16"wide) which are inserted in slots near the front of the strap to help keep them secure Compatible for use with Macey and Globe-Wernicke Sectional Bookcases. Note: Straps can be cut to length. Sold by the Pair (1 Right Hand and 1 Left Hand) - BL-2798

$ 12.95 pair + shipping

Shipping available to the Lower 48 Continental United States Only. 

Click here to see our Payment Terms
To pay using Money Order or Cashier's Please Contact Us

Sectional Bookcase Door Liner
10-1/2"long x 1"high with 1/4"roller base, Steel with Black Finish
Mount on inside of cabinet for smooth door movement. Compatible for use with Macey and Globe-Wernicke Sectional Bookcases. Note: Strips can be cut to length. Sold by the Pair - S-2795

$ 6.25 pair + shipping

Shipping available to the Lower 48 Continental United States Only. 

Click here to see our Payment Terms
To pay using Money Order or Cashier's Please Contact Us

Step Back Shelf Bracket for Globe-Wernicke "C" or "D" style Stacking Units. Reproduced from original parts.Overall: 3-1/8"long x 27/32"wide (for 3/4"thick wood)Antiqued Brass Plated Steel. Brass Escutcheon Pins included. -  AD-2796

$ 7.50 pair + shipping

Shipping available to the Lower 48 Continental United States Only. 

Click here to see our Payment Terms
To pay using Money Order or Cashier's Please Contact Us

Step Back Shelf Bracket for Globe-Wernicke "E" style Stacking Units. Reproduced from original parts.Overall: 4-9/16"long x 27/32"wide (for 3/4"thick wood)Antique Brass Plated Stamped Steel. Brass Escutcheon Pins included.  - AD-2797

$ 7.50 ea. + shipping

Shipping available to the Lower 48 Continental United States Only. 

Click here to see our Payment Terms
To pay using Money Order or Cashier's Please Contact Us

Brass Plated Steel Wicker Chair Brace Overall: 5-1/2"long x 11/16"wide
45 Degree Angle attaches to leg and bottom of chair for added support. 
D-2775

$ 7.50 ea. + shipping

Shipping available to the Lower 48 Continental United States Only. 

Click here to see our Payment Terms
To pay using Money Order or Cashier's Please Contact Us

Sectional Bookcase Door Stop & Pivot Bracket BRACKET Overall - 7/8"wide x 7/8"high Installs on backside of bookcase door. STOP - 7/8"projection when installed on inside of bookcase frame. When the closed door is pulled out to the horizontal position, the Door Stop pivots in the Bracket so that the door can be pushed inside the cabinet. Compatible for use with Macey and Globe Wernicke Sectional Bookcases. Sold by the Set to mount one door. (Includes 1 Right Hand Bracket & 1 Left Hand Bracket with Fasteners, 2 Bushings, 2 Screws, & 2 Washers.) - S-2794

$ 4.50 ea. + shipping

Shipping available to the Lower 48 Continental United States Only. 

Click here to see our Payment Terms
To pay using Money Order or Cashier's Please Contact Us

Universal Drop Front Desk/Lid Stay
Overall Length: 9-1/2" ~ Brass
Mounts to inside of desk and to drop front. - B-2744

$12.50  ea. + shipping

Shipping available to the Lower 48 Continental United States Only. 

Click here to see our Payment Terms
To pay using Money Order or Cashier's Please Contact Us

Brass Right Hand Drop Front Desk STAY
Overall Length: 5-3/4"
Mounts to inside of desk and to drop front.
To determine if you need a Right Hand Stay, while facing the desk, if the stay is to be mounted on the right side you will need a Right Hand Stay. - B-2743R

$ 12.50 ea. + shipping

Shipping available to the Lower 48 Continental United States Only. 

Click here to see our Payment Terms
To pay using Money Order or Cashier's Please Contact Us

Universal DROP FRONT DESK/LID STAY
Overall Length: 9" - Each Leg: 4-1/4"long x 3/8"wide
Mounts to inside of desk and to drop front. Reversible.
Steel with Statuary Bronze finish  - AS-2740

  $ 2.95 ea. + shipping

Shipping available to the Lower 48 Continental United States Only. 

Click here to see our Payment Terms
To pay using Money Order or Cashier's Please Contact Us

Brass plated steel trunk lid stay stop hinge.
Open - 6 3/4" long by 1" wide. - D-4828

$ 3.50 ea. + shipping

Shipping available to the Lower 48 Continental United States Only. 

Click here to see our Payment Terms
To pay using Money Order or Cashier's Please Contact Us